
|
|
Revenge Fly Line Tape
"Hardware Mounting Kit"
Directions:
Follow the complete directions which are enclosed for mounting the Tape System Hardware. For best results, your Fly Line Tape should be about 5 inches from the ceiling and away from drafts.
- Mount the Hardware as shown on the enclosed directions.
- Attach the Empty Reel to the hand crank and hang at the ending wall bracket. This will become your take-up reel.
- Connect the Full Reel to the starting wall bracket. Thread the tape thru the pulleys and attach to Rewind Reel.
- When the exposed Revenge Fly Line Tape is black with flies, just unhook the brakes and crank out a fresh length of the Tape.
"The Huge Reel"
Directions:
- Replace the empty reel in your system with this new full reel.
- Place the empty reel onto the ending wall bracket with the hand crank. This becomes your new take-up reel.
- Thread the tape thru the pulles and attach to the new take-up reel.
- When the exposed Revenge Fly Line Tape is black with flies, unhook the brakes and just crank out a fresh length of the Tape.
Disposal: When the take-up reel is completely full of the Fly Tape, remove the reel and throw into the trash. Clean up the non-toxic glue with peanut butter or vegetable oil.
"The Mini-Reel Kit"
Directions:
When Hanging your Fly Tape try to keep it about 5" from the ceiling and away from drafts.
- Full Mini Reel-Screw through hole in center spindle to attach to wall or ceiling.
(use anchors if mounting to drywall)
- Empty Mini Reel - This is your take-up reel, mount 8-12 ft from the full reel in a straight and level line. Mount same as above (1)
- Remove protective paper and pull tape over to take-up reel. Wind onto take-up reel several times to attach.
- When the exposed Fly Tape is black with flies, turn take-up reel to expose a fresh length of the Revenge Sticky Fly Tape.
|
Webkeeper: E. W. Acosta - mailto:info@biconet.com
|
Last Update: 22 May 08
|
Copyright © BICONET 2008 All Rights Reserved.
|
http://www.biconet.com/flies/flyLineTape.html
|
|
| |