To control Aphids, Ants, Bees, Centipedes, Cockroaches, Crickets, Darkling Beetles, Firebrats, Fleas, Ground Beetles, Fowl Mites, Mites, Millipedes, pillbugs, Silverfish, Sowbugs, Spiders, Ticks, and Wasps. In compressed air sprayers, dilute 4 - 8 fluid ounces of EcoEXEMPTª IC per gallon of water and apply at the rate of 2 gallons per 1,000 square feet or until area is thoroughly wet. Also apply a band of soil and vegetation 6 to 10 feet wide around and adjacent to building. Treat the building foundation to a height of 2 to 3 feet with sufficient water for coverage. For power sprayers, mix approximately 2 - 6 fluid ounces per gallon of water and apply until area is sufficiently covered (usually a minimum of 4 gallons per 1,000 square feet).
To control flies and other unwanted pests, apply approximately 1 gallon of EcoEXEMPTª IC into 70 - 80 gallons of water and spray through conventional equipment. Repeat as necessary.
Use on Turf and Grass:
Used alone as a contact spray: To control Ants, Armyworms, Pillbugs, Chinch Bugs, Chiggers, Crickets, Cutworms, Earwigs, Fleas, Grasshoppers, Hyperodes, Weevils (adults), Japanese Beetles (adults), Mole Crickets, Sod Webworms, and Ticks, dilute in a compressed air sprayer (or backpack) 2 - 4 fluid ounces of EcoEXEMPTª IC per gallon of water and apply at the rate of 2 - 4 gallons per 1,000 square feet or until area is thoroughly wet. For power sprayers, mix approximately 2 - 4 fluid ounces per gallon of water and apply until area is sufficiently covered (usually minimum of 4 gallons per 1,000 square feet with a power sprayer).
In combinations with other insecticides:
To provide quick knockdown of insects when used with a residual insecticide, tank-mix EcoEXEMPTª IC at the rate listed above with the proper amount of companion insecticide and apply per the Directions for Use on the companion insecticide label.
Exceeding rates will create potential phytotoxicity of turf surfaces.
How to Order
| Shipping Guide
| Contact Us